Reports; Generate Full Report For Individual Tests; Eyeseesix Report - Interacoustics EyeSeeCam Instructions For Use Manual

EyeSeeCam vHIT Instructions for Use – EN
4.6

Reports

4.6.1 Generate full report for individual tests

After a short period of time the full test report will be generated automatically. You can close out of this
screen and return to the main testing menu by clicking on the small red 'x' in the top right hand corner of
the screen. When reviewing previously collected data you can view the full report by clicking on the
Generate Report button from the Report Preview screen.
Figure 4-267 Full Report

4.6.2 EyeSeeSix report

Begin by first clicking on the session date you wish to generate a report for. Then place a tick mark next
to the 3 protocols you would like to see in your report. Finally select Generate Report.
Figure 4-278 Generate an EyeSeeSix Report
Page 31