Introduction; About This Manual; General; Software Rights - Interacoustics OtoRead Instructions For Use Manual

1 Introduction

1.1 About this manual

This manual is valid for the OtoRead™ Module software version 1.91.1.
The product is manufactured by:
This manual describes the functions of the OtoRead Module software. It is recommended that users of
the software read the manual thoroughly before using it.

1.2 General

The OtoRead™ module is used to save and view measurements recorded using the OtoRead
The OtoRead Module is used in conjunction with the OtoAccess
TM
The OtoRead™ Module is used for:
• Downloading otoacoustic emission (OAE) measurements from the OtoRead™ to a laptop/PC
• Reviewing saved Distortion Product (DP) or Transient Evoked (TE) OAE sessions
• Printing graphical and numerical test results from one or two ears

1.3 Software rights

The software may be installed on more than one computer as long as it is used with only one single
OtoRead™ device. Each OtoRead™ device using the software must have its own license. This
agreement constitutes one license. You may make one copy of the software solely for archival or backup
purposes. You may not sell or otherwise transfer the software to a third party, nor create any derivative
work of the software as the rights are owned by Interacoustics A/S.
If you should have any questions concerning the use of the software, please contact us.

1.4 Warnings

Throughout this manual the following meanings of warnings, cautions and notices apply:
NOTICE
D-0115350-B – 2019/04
OtoRead™ Module - Instructions for Use - EN
Interacoustics A/S
Audiometer Allé 1
5500 Middelfart
Denmark
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous
situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
database.
®
device.
TM
Page 1