supported by the touch screen controls include tapping, pinching&stretching, as well
as dragging.
4.5.1
Tap
Use one finger to tap the symbol or characters on the screen slightly, as shown in
Figure 4.13
•
Tap the menu displayed on the screen to operate on the menu.
•
Tap the function navigation icon at the lower-left corner of the touch screen to
enable the function navigation.
•
Tap the displayed numeric keypad to set the parameters.
•
Tap the virtual keypad to set the filename.
•
Tap the close button at the upper-right corner of the message box to close the
prompt window.
•
Tap other windows on the touch screen and operate on the windows.
4.5.2
Drag
Use one finger to select the object, and then drag the object to a destination place, as
shown in the figure below. With the drag gesture, you can perform the following
operation:
•
Drag the waveform to change its position or scale.
•
Drag the window controls to change the position of the window (e.g. numeric
keypad).
•
Drag the cursor to move the cursor.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
. With the Tap gesture, you can perform the following operations:
Figure 4.13 Tap Gesture
Quick Start
DHO800 User Guide
27