Ambient Requirements For Operation; Ambient Requirements For Transport And Storage; Wireless Communication; Wi-Fi Router Information - Zeiss EXTARO 300 Instructions For Use Manual

Instructions for Use

Ambient requirements for operation

Designation
Temperature
Rel. humidity
Air pressure

Ambient requirements for transport and storage

Designation
Temperature
Rel. humidity (without condensation)
Air pressure

Wireless communication

11.7.1 Wi-Fi router information

•
Release version of firmware: V1.2
•
Frequency band(s): 2.4G:2.412 – 2.472 GHz
•
RF Output Power:




•
Antenna type: Dipole Antenna
•
Antenna gain: 2.0 dBi
•
Maximum radio-frequency power transmitted: 20 dBm ± 2.0 dBm
•
Operation modes: Duplex
•
Modulation Type: DSSS/OFDM

11.7.2 Statement of Class B digital device (Part 15 of the FCC Rules)

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
− Reorient or relocate the receiving antenna.
305935-3500-000 – 2.1 – 2017-12-15
802.11b: 19.75 dBm (EIRP)
802.11g: 19.85 dBm (EIRP)
802.11n 20MHz: 19.95 dBm (EIRP)
802.11n 40MHz: 19.75 dBm (EIRP)
Value
+ 10°C ... + 40°C
30% ... 75%
700 hPa ... 1060 hPa
Value
- 40°C ... + 70°C
10% ... 90%
500 hPa ... 1060 hPa
Technical specification
48 / 59