Seat Insert, Small - Otto Bock Kimba Neo Instructions For Use Manual

Use
2) Undo all the hook-and-loop straps on the incontinence cover (see fig. 83).
3) Place the seat pad in the incontinence cover.
4) Attach the incontinence cover to the back support pad:
→ Lay the back support pad on the incontinence cover (see fig. 84).
→ Pass the three lower hook-and-loop straps around the back support pad and fasten the loose ends together
(see fig. 85, item 1).
→ Thread the vertical hook-and-loop straps through the back support pad (see fig. 85, item 2).
5) Attach the back support pad to the seating unit:
→ Pull the back support pad with the cap over the back support.
→ Feed the vertical hook-and-loop straps backwards over or through the back support (see fig. 86, item 1).
→ Pass the upper horizontal hook-and-loop strap around the back support and fasten the ends together (see
fig. 86, item 2) ensuring that the vertical hook-and-loop straps are secured by the horizontal hook-and-loop
straps (see fig. 86, item 3).
6) Pass the back support pad underneath the back support and secure it with the twist lock (see fig. 100).
83
85
Removing and cleaning the incontinence cover
1) Remove the seat pad and the back support pad from the seating unit (see Page 46).
2) Detach the incontinence cover from the seat padding and put it aside.
3) Remove the incontinence cover from the back support pad by undoing all the hook-and-loop straps and detach­
ing the incontinence cover from the back support pad.
4) Wash the incontinence cover in accordance with the washing symbols on the care label.
INFORMATION: Before washing the incontinence cover, close the straps so the entire hook-and-loop
surface of the straps is covered.

7.2.15 Seat insert, small

The seat insert provides very small children with better support in the seating unit (see fig. 87). The seat insert can
be removed for washing. Before washing the insert, close the attachment straps.
40
84
86
Kimba Neo