Additional Information; Technical Information; Disposal; Legal Information - Otto Bock Helix3D 7E10 Instructions For Use Manual

5

Additional information

5.1 Technical information

Sides
Proximal connection
Distal connection
Max. flexion angle
Weight of the joint
Weight of connection technology
System height
Material
Mobility Grade
Max. body weight
Operating and storage temperature range ­10 °C to +60 °C

5.2 Disposal

In some jurisdictions it is not permissible to dispose of the product with unsorted household waste. Improper dis­
posal can be harmful to health and the environment. Observe the information provided by the responsible autho­
rities in your country regarding return, collection and disposal procedures.

5.3 Legal information

All legal conditions are subject to the respective national laws of the country of use and may vary accordingly.

5.3.1 Liability

The manufacturer will only assume liability if the product is used in accordance with the descriptions and instruc­
tions provided in this document. The manufacturer will not assume liability for damage caused by disregard of
this document, particularly due to improper use or unauthorised modification of the product.

5.3.2 CE conformity

The product meets the requirements of Regulation (EU) 2017/745 on medical devices. The CE declaration of
conformity can be downloaded from the manufacturer's website.

5.3.3 Trademarks

All product names mentioned in this document are subject without restriction to the respective applicable trade­
mark laws and are the property of the respective owners.
All brands, trade names or company names may be registered trademarks and are the property of the respective
owners.
Should trademarks used in this document fail to be explicitly identified as such, this does not justify the conclusion
that the denotation in question is free of third­party rights.
Helix
Right (R), Left (L)
Lamination plate
Pyramid adapter
130°
990 g
275 g
146 mm
Aluminium
2 + 3
100 kg
Ottobock | 47