Display Of The Current Charge Level; Display Of Battery Charge Level Without Additional Devices; Display Of The Current Charge Level Using The Cockpit App; Display Of The Current Charge Level During The Charging Process - Otto Bock Genium 3B1-3 Instructions For Use Manual

6.3 Display of the current charge level

6.3.1 Display of battery charge level without additional devices

INFORMATION
The charge level cannot be displayed during the charging process, e.g. by turning the prosthes­
is over. The product is in charging mode.
Beep signal
5x short
4x short
3x short
2x short
1x short
INFORMATION
If the Volume parameter is set to '0' in the Cockpit app (see page 30) or if mute mode (silent
mode) is activated, there are no beep signals.

6.3.2 Display of the current charge level using the Cockpit app

Once the Cockpit app has been started, the current charge level is displayed in the bottom line of
the screen:

6.3.3 Display of the current charge level during the charging process

During the charging process, the current battery charge level is indicated by the number of LEDs
lit on the side of the charger.
1) Turn the prosthesis by 180° (the sole of the foot must face up).
2) Hold still for 2 seconds and wait for beep signals.
1. 38% – Charge level of battery for currently connected
component
Battery charge level
more than 80%
60% to 80%
40% to 60%
20% to 40%
less than 20%
Quantity
0
1
2
3
4
5
Battery charge level
0%-10%
10%-30%
30%-50%
50%-70%
70%-90%
> 90%
21