Control Panel For Attendant; Attendant Control - Otto Bock C1000 SF Instructions For Use Manual

6.14.2 Control panel for attendant

If the power wheelchair control panel is mounted behind the seat, the attendant instead of the user can carry out all
control functions (see Page 21).

6.14.3 Attendant control

The power wheelchair can be equipped with an optional separate control panel for attendant operation. The separ­
ate control panel is angle-adjustable.
The attendant control is located on the backrest cross tube.
Functional overview
The attendant uses the attendant control to operate the driving function and the power seat functions.
The module is connected in conjunction with the control panel or as a separate input device.
32
Joystick
The attendant uses the joystick to control the speed and driving direction. When a seat option is activated, the joy­
stick operates this seat option.
[On/Off] button
The button is used for switching the power wheelchair on, activating the drive-away lock and switching the wheel­
chair off.
[Charge level] LED display
INFORMATION
► The following information on LED function only applies when the attendant control is used as an individual
input device.
► If the control panel/attendant control are used in combination, the battery charge level is indicated by
the display symbols on the LCD screen (see the section "Button and display functions").
The LED lights up when the unit is on.
Colour and flash codes provide information on the current battery charge level:
LED
Green is lit
Orange is lit
Red is lit
Red is flashing
Green is flashing
Red/orange/green flashing
alternately
[Mode] button
Switch between speed level 1 and 2 by pressing the button briefly.
Push and hold the button (at least 2 seconds) to switch the control unit to the power seat functions.
C1000 SF
Information
Battery charge level >70 %
Battery charge level 30% - 70%
Battery charge level < 30%
Battery deep discharge
Charge as soon as possible
Battery over-voltage (e.g. after driving downhill)
Continue driving slowly
Charging process/drive-away lock
Attendant control overview
1 Joystick
2 [On/off] button
3 [Charge level] LED display
4 [Mode] LED indicator
5 [Mode] button
6 [Selected power seat function] LED indicator
Use
47