Otto Bock C1000 SF Instructions For Use Manual page 49

33
Seat functions that can be controlled
Depending on the power wheelchair model and programming of the push-button module, up to 5 power seat func­
tions (see Fig., item 1) can be controlled during normal driving operation:
Display
Push button functions
• The [Mode] button (see item 2) is used to toggle among the different functions (1-2-3-4-5-1-2-...).
• The blue LED (see item 3) indicates the selected power function.
• The respective function (function up/down) is activated using the buttons [Selected function up] and [Selected
function down] (see item 4).
INFORMATION
The function of the [Selected function up/down] buttons can be programmed according to the user's wishes (but­
ton [Selected function up] = function up or function down – depending on programming).
C1000 SF
Information
Power seat height adjustment
Power seat tilt
Power back angle adjustment
Power footrest, left
Power footrest, right
Power footrests, coupled
Other special functions (combinations)
S1 – S5
Push-button module overview
1 Available power functions
2 [Mode] button
3 [Selected function] LED indicator
4 [Selected function up/down] buttons
5 Jack plugs for connecting Piko buttons
Use
49