Armrest; Control Panel - Otto Bock B 600 Instructions For Use Manual

Setting and Adjustment Possibilities
8.2

Armrest

Remove the armrests by loosening the thumb screws and lifting the armrest. The
thumb screws are located at the lower end of the armrest holders (fig. 5).
The armrest height is changed by loosening the screw at the upper end of the armrest
holders (fig. 6).
Ensure the screw is snugly re-tightened after making any adjustments.
8.3

Control Panel

For adjusting the position of the control panel on the armrest, loosen the attachment
screws on the underside of the armrest.
Slide the control panel backwards or forwards to position it to the desired arm length
(fig. 7).
62
Fig. 5: Removal of the armrests
Fig. 6: Height adjustment of the armrests
B600 – Instructions for Use