Appendices; Threshold Values For Wheelchairs Transportable By Train - Otto Bock C1000 SF Instructions For Use Manual

11 Appendices

11.1 Threshold values for wheelchairs transportable by train

INFORMATION
► The wheelchairs in this series fully satisfy the minimum technical requirements of regulation (EU)
No. 1300/2014 for wheelchairs transportable by train, but not all threshold values are met.
► With the help of the table that follows, you or the qualified personnel can take measurements and verify wheth­
er the concrete wheelchair meets the threshold values.
Feature
Length
Width
Smallest wheels
Height
Turning radius
Maximum weight
Maximum obstacle height that can be
overcome
Ground clearance
Maximum inclination angle on which the
wheelchair will remain stable
C1000 SF
Threshold value (according to regulation (EU) No. 1300/2014)
1200 mm (47.2"); plus 50 mm (2") for the feet
700 mm (27.6"); plus 50 mm (2") on each side for the hands when
moving
approx. 3" or greater according to the regulation, the smallest wheel
must be able to accommodate a gap measuring 75 mm (3") horizont­
ally and 50 mm (2") vertically
max. 1375 mm (54.1"); including a 1.84 m (72.5") large male wheel­
chair user (95th percentile)
1500 mm (59.1")
300 kg (661 lbs); for wheelchair with occupant, including baggage
50 mm (2")
60 mm (2.4"); at an upward slope angle of 10°, ground clearance
must measure at least 60 mm (2.4") under the foot rest for going for­
ward at the end of the slope
6° (dynamic stability in all directions)
9° (static stability in all directions, also when wheel lock engaged)
Appendices
65