3.4.3 Warning labels
Label
4 Delivery
4.1 Scope of delivery
The power wheelchair is normally shipped fully assembled and fitted to the personal requirements of the respective
user.
The scope of delivery includes:
•
Fitted power wheelchair with main components
•
Installed options
•
Battery charger
•
Instructions for use (user)
4.2 Options
The standard model can be fitted to the user's personal requirements thanks to a large range of options.
A full list of the available modules and accessories is shown on the order form and in the accessories catalogue.
To use options: see Page 13 et. seq.
4.3 Storage
4.3.1 Storage during daily use
The power wheelchair should always be protected against external influences.
The control unit must be turned off.
4.3.2 Storage during extended disuse
NOTICE
Deep discharge
Battery damage due to standby current
► Deactivate the circuit breaker if the wheelchair is not used for more than 3 days.
► To deactivate the circuit breaker: see Page 13
Please observe the following if the power wheelchair is not used for more than 3 days:
Storage conditions
•
Maintain an ambient temperature between -15 °C and +40 °C (5 °F and +104 °F) and relative humidity
between 45 % and 85 %.
•
Store the power wheelchair in a dry, enclosed room with sufficient air circulation and protection from external
influences.
•
Protect the wheels against ground frost, e.g. by relieving them completely through assembly blocks or wooden
boards.
C1000 SF
A Power driving mode: lock motor brake
B Manual driving mode: unlock motor brake
Risk of pinching. Do not reach into the danger area.
(Only in case of installation of ISO sets according to ISO
7176)
Fixation point/eyebolt to attach the product in vehicles for trans
porting persons with reduced mobility
Meaning
Delivery
11