Otto Bock C1000 SF Instructions For Use Manual page 64

Hide thumbs Also See for C1000 SF:
Table of Contents

Advertisement

Technical data
** = 3-point turn by 180°
Electrical system*
IP protection rating (according to DIN EN
60529)
Operating voltage
Batteries:
Gel (standard)
Lighting:
Front
direction
indicator
guard)
Front light (on splash guard)
Rear direction indicator
Rear light
Circuit breaker
Battery charger
* The product meets all requirements under ISO 7176-14.
Control unit
Model
Operating voltage
Max. output current per motor
Force for operating the joystick on the
standard control panel
Control unit accessories
Model
Protection rating
Driving data
Speed*
Nominal incline (base model)**
Dynamic stability – uphill***
Maximum obstacle height
Driving distance range (on level sur­
faces)***
Braking distance (according to DIN EN
12184)****
Operating temperature
Transport and storage temperature
* The specified speed can vary by ±10%.
** The control device and the motors have to be protected against overloading. Therefore, the continuous climbing
ability depends on the overall weight (wheelchair weight + user weight + load) as well as the ground conditions,
exterior temperature, battery voltage and driving style of the user. In individual cases, the continuous climbing abil­
ity can be significantly lower than the value specified.
*** The specified driving distance range was determined under defined conditions according to ISO 7176-4. In
practice the driving distance range can be reduced by up to 50%. For information on this, see the section "Driving
distance range" in the instructions for use (user).
**** The braking distance can be correspondingly longer due to user weight, installed options and condition of the
tyres, and due to weather and surface conditions.
Corrosion protection
Corrosion protection
64
IPX4
24 V
2 x 12 V; 63 Ah (C5) / 74 Ah (C20)
(on
splash
12 V, 1 W
12 V, 2.4 W
12 V, 1 W
12 V, 1 W
Circuit breaker: 120 A, vapour and water proof
For more information see the included battery charger instructions for
use
enAble50
24 V DC
2 x 130 A
1.6 N
Push-button module for enAble50 control unit
IPX4
6 km/h [3.7 mph], 10 km/h [6.2 mph]
(exact information see nameplate)
Climbing ability* without stand-up function (sitting): max. 10° (17%)
With activated stand-up function: max. 3° (5%)
10° (17%)
75 mm
approx. 35 km
at 6 km/h [3.7 mph]: 1000 mm (horizontal); 2000 mm (incline)
at 10.0 km/h [6.2 mph]: 2100 mm (horizontal); 4200 mm (incline)
-15 °C to +40 °C
-15 °C to +40 °C
Coated frame
C1000 SF

Advertisement

Table of Contents
loading

Table of Contents