Control Unit Accessories; Separate Lcd Monitor - Otto Bock C1000 SF Instructions For Use Manual

Hide thumbs Also See for C1000 SF:
Table of Contents

Advertisement

Use
29

6.14 Control unit accessories

6.14.1 Separate LCD monitor

CAUTION
Incorrect installation of electric options from other manufacturers
Injuries due to uncontrolled driving behaviour
► Ottobock offers an interface for alternate input devices (environment and special controls) with the LCD mon­
itor. Ottobock assumes no liability for combinations with special controls and/or accessories from other manu­
facturers.
► Accessories from other manufacturers must be intended for use on wheelchairs and must fulfil all currently
applicable legal requirements under the Medical Devices Act as well as further applicable standards.
INFORMATION
More detailed information and operating instructions are contained in a separate manual. Please contact the qual­
ified personnel who adjusted your product.
The power wheelchair can be equipped with a separate LCD monitor with infrared and Bluetooth
installed, the control panel LCD screen only shows the battery charge level. Otherwise it has no function (see
below).
The LCD monitor performs the following functions:
The LCD monitor displays the current statuses of all power functions and electrical components, as well as
faults and malfunctions.
The LCD monitor allows devices with infrared control to be controlled with the control panel joystick. First the
devices are programmed into the control unit using a learning mode:
Standard household appliances and hi-fi devices (TV, DVD, phone)
Light switches or dimmers
Switches to operate blinds
Mouse emulator (joystick signals are used to control a computer mouse)
The LCD monitor is the interface to the connected special controls. The input devices of the special controls
(e.g. sip-and-puff control, chin control) can also be used for infrared functions. Detailed information can be
found in the "Special Controls" instructions for use, article number 647G636=*.
42
Rear lights
Two LED rear lights (inside) and two LED direction
indicator lights (outside) are installed in the steering
motor moldings at the rear of the power wheelchair.
Reflectors
Reflectors are installed respectively on the right and left
of the battery case.
With luggage carrier installed: Do not cover the
reflectors with luggage when loading the luggage carri­
er.
TM
. If it is
C1000 SF

Advertisement

Table of Contents
loading

Table of Contents