Otto Bock C1000 SF Instructions For Use Manual page 43

30
Turning the power wheelchair on
After turning the power wheelchair on with the [On/Off] button on the control panel, the Driving menu is
•
shown on the LCD monitor (see below).
If the power wheelchair is turned on via the LCD monitor, the Main menu is displayed there first. Now the joy­
•
stick has to be moved forward 1 x in order to drive. Only after moving the joystick forward does the Driving
menu appear (see below).
• The battery symbol is shown on the control panel LCD screen:
Display
Driving menu
The power wheelchair is operated with the Driving menu.
•
• The status of the driving functions as well as malfunctions/faults are displayed in the Driving menu.
• Moving the joystick causes the power wheelchair to begin driving in that direction (see Page 27).
• The speed level (see Page 27) is increased each time the [Mode] button on the control panel is pressed briefly.
31
3,5
INFORMATION
If the power wheelchair is turned on via the LCD monitor, the Main menu is displayed there first. Now the joystick
has to be moved 2 x in order to drive:
► After moving the joystick forward, the Driving menu is shown.
► Move the joystick a second time in order to start driving the power wheelchair.
C1000 SF
Information
Driving information is only shown on the LCD monitor
km/h
LCD monitor with main menu
1 [On/off] button
Driving menu
2
Options menu
3
Favourites menu
4
5 Standby function interface
1 Speed level
2 Driving speed
3 Battery charge level
4 Drive wheel brake
5 Excess temperature
6 Open-end wrench
7 Warning
8 Direction indicator, right
9 Direction indicator, left
10 Light
11 Creep speed
Use
43