Otto Bock C1000 SF Instructions For Use Manual page 22

Use
[Mode] button
Pressing the button briefly increases/decreases the speed level (see Page 27).
Holding the button longer (for at least 2 seconds) switches the control unit to the Power seat functions or Addi­
tional options menu.
In combination with additional operating steps, holding the button longer (at least 5 seconds) also activates/deac­
tivates the drive-away lock (see Page 28).
[Warning flasher on/off] button
All 4 warning flashers are activated/deactivated when this button is pressed.
[Horn] button
The horn will sound as long as the button is pressed.
[Direction indicator right] and [Direction indicator left] buttons
Pressing these buttons activates/deactivates the respective front and rear direction indicators. The direction indic­
ator lights turn off automatically after 20 seconds.
[Lights on/off] button
The front and rear lights are activated/deactivated by pressing this button.
LCD screen
The LCD screen is the communication interface between the user and the control unit. It indicates the selected
speed level, the battery charge level and the status of power options, as well as warnings and faults. All display
symbols are displayed while powering up.
16
Selected speed level (LCD screen)
After turning the control panel on, the LCD screen indicates the last selected speed level and charge level of the
battery in the Driving menu.
Display
Selected speed level (LCD screen with connected separate LCD monitor)
After turning the control panel on, the LCD screen displays the battery symbol in the Driving menu.
Additional information is only shown on the LCD monitor: see Page 42).
22
Information
Selected speed level = 1 (left: battery charge level)
1 Direction indicator, left
2 Battery charge level
3 Power backrest
4 Power seat tilt
5 Control panel
6 Drive-away lock
7 Speed level
8 Open-end wrench
9 Excess temperature
10 Direction indicator, right
11 Drive wheel brake
12 Warning
13 Creep speed
14 Power module
15 Drive motor
16 Light
C1000 SF