Joystick Functions; Lighting - Otto Bock C1000 SF Instructions For Use Manual

6.12.9 Joystick functions

The following power seat functions can be controlled with the joystick:
Display Display
1)
Direction of movement can be modified by the specialist dealer.

6.13 Lighting

The power wheelchair comes with effective LED front and rear lighting as standard equipment. The installed light­
ing is suitable for driving in street traffic during hours of darkness.
The lights, left and right direction indicators and warning flashers are turned on and off using the control panel.
Information on replacing broken lamps: see Page 59.
28
C1000 SF
Function
Electric stand-up function
S1
S2
Power seat tilt
Power back angle adjustment
Power elevating legrest
Power lowering footplate
Power tilt function
S2
S3
Power prone function
S3
Joystick movement
Forward: Seat surface moves up into the
standing position
Back: Seat surface moves down into the
sitting position
At the same time, all the other functions
are brought into their initial position.
Back: Seat slowly tips back
Forward: Seat slowly tips forward to a
horizontal position
Back: Backrest tilts backward
Forward: Backrest tilts forward
Forward: Legrest moves up
Back: Legrest moves down at an angle
Biomechanical leg length adjustment takes
place automatically at the same time.
Forward: Footplate is lowered towards the
floor
Back: Footplate is lifted up off the floor
Forward: Seat bottom and legrest move to
a 45° tilted prone position
Back: Seat bottom and legrest move back
to the sitting position
Forward: Seat bottom and legrest move to
a half prone position
Back: Seat bottom and legrest move back
to the sitting position
Front lights
An LED headlight (top) and LED direction indicator
light (bottom) are attached to the right and left splash
guards of the drive wheels, respectively.
Use
1)
41