Parts and Tools Required
In addition to the IQ8D Microinverters, PV modules, and racking, you will need the following:
Enphase BOM
Enphase IQ8D Commercial Gateway:
Enphase Installer App:
Tie wraps or QD Cable Clips:
Enphase Sealing Caps:
Enphase Terminator:
Enphase Disconnect Tool:
Enphase Center Tap Adapter cable:
Enphase Field Wireable Connectors:
Model Number
QD-12-10-150
QD-12-20-135
QD-12-42-63
QD-12-RAW-300
Other Items:
•
AC junction box.
•
Number 2 and 3 screwdrivers.
•
Wire cutters, voltmeter.
© 2022 Enphase Energy Inc. All rights reserved.
Required to monitor production. IQ8D Commercial Gateway
(model ENV-IQ8D-AM3-3P) communications gateway
Download the Enphase Installer App mobile app, open it, and log in to your
Enlighten account. Use it later to scan Microinverter serial numbers and
connect to the IQ8D Commercial Gateway track system installation progress. To
download, go to
(ET-CLIP-100)
(QD-SEAL-10) for any unused drops on the Enphase Q Cable
(QD-TERM-10) typically 1 Terminator (End feeding branch circuit) or 2 Terminator
(Center feeding branch circuit) required per branch circuit
(QD-DISC-10)
QD-LINKFW-10 (For IQ8D systems with QD Cable QD-12-42-63)
Male QD-CONN-10M and female QD-CONN-10F
QD CABLE TYPES / ORDERING OPTIONS
Size
Max Voltage
277 VAC
12 AWG
277 VAC
12 AWG
277 VAC
12 AWG
300 m (984.2 ft) of 12 AWG cable with no connectors
Table 15: QD Cable Types/Ordering Options
•
Screwdriver blade width 4 mm to 3.2 mm (1/8") (recommended tool to torque
the screw on contact carrier and to disconnect field wireable connector).
•
Torque wrench, sockets, wrenches for mounting hardware, 30mm wrench.
•
DC disconnect tool for the DC connector type used.
enphase.com/toolkit
Connector
PV Module Orientation
Spacing
1.4 m (4.6 ft)
2.4 m (7.9 ft)
4.6 m (15.1 ft)
Landscape Ballast
Connector
Count per Box
Portrait
Landscape
IQ8D-DG-MKT-00397-02-EN-US-2022-06-10
150
135
63
43