Table 20: Iq8D-72-E-Us Microinverter Specifications - enphase IQ8D-72-E-US Design Manual

MECHANICAL DATA
Ambient temperature range
Relative humidity range
DC connector type
8
Adapters (Optional)
8
Dimensions (HxWxD)
Weight
Cooling
Approved for wet locations
Enclosure
Environmental category /
UV exposure rating
FEATURES
Communication Power Line Communication (PLC)
Enlighten Manager and MyEnlighten monitoring options.Both options require installation of an Enphase IQ8D
Monitoring
Commercial Gateway.
CA Rule 21 (UL 1741-SA)
UL 62109-1, UL1741/IEEE1547, FCC Part 15 Class B, ICES-0003 Class B,
UL 3741 UL Standard for Safety, Photovoltaic Hazard Control,
Compliance UL 1699B UL Standard for Safety, Photovoltaic (PV) Arc-Fault Circuit Protection, CAN/CSA-C22.2 NO. 107.1-01
This product will be UL listed as PV Hazard Reduction System Component. When installed in
accordance with the rapid shutdown PV array listing or field labeling instructions the resulting
array complies with the requirements for rapid shutdown in accordance with NEC Section 690.12 (B) (2) (1).
1. No enforced DC/AC ratio. See the compatibility calculator at https://enphase.com/en-us/support/module-compatibility.
2. Nominal voltage range can be configured if required by the utility.
3. Limits may vary. Refer to local requirements to define the number of Microinverters per branch in your area.
4. Full power up to 50ºC, derate after.
5. Qualified per UL subject 9703.
7. For field wiring of UL certified DC connectors.
8. Enphase IQ8D microinverter bulkhead and adapter cable male, female DC connectors must only be mated with the identical type and
manufacturer brand of male/female connector.
© 2022 Enphase Energy Inc. All rights reserved.
-40ºC to +60ºC (-40ºF to +140ºF)
4% to 100% (condensing)
Enphase EN4 bulkhead
ECA-EN4-S22 : EN4 (TE PV4-S SOLARLOK) 150mm/5.9" to Staubli MC4 adapter cable pair
(Default Supply)
5
ECA-EN4-FW-12: EN4 (TE PV4-S SOLARLOK) to 150mm/5.9" non-terminated cable (Pack of 12
pairs - Optional)
6
ECA-EN4-S22-10-12 : EN4 (TE PV4-S SOLARLOK) 1000mm/39.4" to Staubli MC4 (Pack of 12
pairs - Optional)
5
ECA-EN4-S22-18-12 : EN4 (TE PV4-S SOLARLOK) 1800mm/70.9" to Staubli MC4 (Pack of 12
pairs - Optional)
5
ECA-EN4-S22-27-12 : EN4 (TE PV4-S SOLARLOK) 2700mm/106.3" to Staubli MC4 (Pack of 12
pairs - Optional)
5
265 mm x 200 mm x 35 mm (10.4" x 7.8" x 1.4") without bracket
1.56 kg (3.4 lbs)
Natural convection
Yes
Class II double-insulated, corrosion resistant polymeric enclosure
IP67 / Sunlight resistant

Table 20: IQ8D-72-E-US Microinverter Specifications

IQ8D-72-E-US
4
IQ8D-72-E-US
IQ8D-DG-MKT-00397-02-EN-US-2022-06-10 94