Parts And Tools Required; Enphase Equipment; Other Items - enphase IQ8P Installation And Operation Manual

Microinverters
Hide thumbs Also See for IQ8P:
Table of Contents

Advertisement

Parts and tools required

In addition to the microinverters, PV modules, and racking, you will need the following:

Enphase equipment

IQ Gateway: Required to monitor production. For installation information,
refer to the IQ Gateway Installation and Operations Manual.
Enphase Installer App: Download the Enphase Installer App, open it,
and log in to your Enphase account. Use it later to scan microinverter
serial numbers and connect to the IQ Gateway to track the system
installation progress. To download, go to
za/installers/apps
IQ Relay: single-phase (Q-RELAY-1P-INT) or IQ Relay, multi-phase (Q-RELAY-3P-INT). For
the Italy region, use IQ Relay (Q-RELAY-2-3P-ITA) for both single-phase and multi-phase
applications.
NOTE: The multi-phase IQ Relay also provides phase coupling to allow microinverters on
all phases to communicate with the IQ Gateway. Use a Legrand Phase Coupler (LPC-01)
for a multi-phase system for phase coupling if IQ Relay is not installed in the multi-phase
system.
Tie wraps or cable clips (ET-CLIP-100 works with both single-phase and multi-phase IQ
Cable)
IQ Sealing Cap (Q-SEAL-10): for any unused connectors on the IQ Cable.
IQ Terminator (Q-TERM-R-10 for single-phase or Q-TERM-3P-10 for multi-phase): One
for each AC cable segment end; typically, two are needed per branch circuit.
IQ Disconnect Tool (Q-DISC-10)
IQ Field Wireable Connectors (male and female: single-phase; Q-CONN-R-10M and Q-
CONN-R-10F; multi-phase: Q-CONN-3P-10M and Q-CONN-3P-10F)
IQ Cable:
Cable model
Single-phase
Q-25-10-240
Q-25-17-240
Q-25-20-200
Multi-phase
Q-25-10-3P-200
Q-25-17-3P-160
Q-25-20-3P-160
IQ Raw Cable (Q-25-RAW-300 for single-phase, Q-25-RAW-3P-300 for multi-phase):
Length 300 meters. Raw cable with no connectors (optional).

Other items

AC junction box
Terminal screwdrivers
Wire cutters, multimeter
Torque wrench, sockets, and wrenches for mounting hardware
13
IQ8P Microinverter Installation and Operation Manual
https://enphase.com/en-
or scan the QR code at right.
Connector
PV module
spacing
orientation
1.3 m
Portrait
2.0 m
Landscape (60-cell)
2.3 m
Landscape (72-cell)
1.3 m
Portrait
2.0 m
Landscape (60-cell)
2.3 m
Landscape (72-cell)
© 2023 Enphase Energy Inc. All rights reserved.
Android
Connector
count per box
240
240
200
200
160
160
September 2023
IOM-00001-1.0
iOS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iq8p-72-2-int

Table of Contents