enphase IQ8D-72-E-US Design Manual page 59

04 Gateway Connectivity
A This brings up the screen indicating your phone's
connectivity to the web and to the Gateway.
B Your phone should be shown as connected to the web,
but not to the Gateway.
C To provision devices, you will need to connect to the
Gateway using AP Mode.
D On the Gateway, press the AP mode button (first
button from left) for about one second. The LED will
light solid green.
E Go to your phone's settings and connect to the
Gateway's locally broadcasted network.
© 2022 Enphase Energy Inc. All rights reserved.
F It will show up on the available Wi-Fi networks as
Gateway------ with the appended digits being the final
numbers of the Gateway serial number. Tap this
network to connect.
G Once connected, Installer Toolkit will show your phone
connected to the Gateway, but not to the web.
H If there are issues connecting to this network, turn OFF
and on AP mode by repeating steps Step D through
step G.
I Configure the Gateway with Wi-Fi or Ethernet
connectivity. The user must input network and
password information in the Wi-Fi section. If
connecting ethernet, simply plug the cable into the
Gateway.
Figure 41: Gateway Connectivity
IQ8D-DG-MKT-00397-02-EN-US-2022-06-10 59