Parts And Tools Required; Enphase Equipment - enphase IQ7 Installation And Operation Manual

NOTE: Protection against lightning and resulting voltage surge must be in accordance with local
standards.

Parts and tools required

In addition to the microinverters, PV modules, and racking, you will need the following:

Enphase equipment

• Enphase IQ
Gateway
Enphase IQ Gateway Installation and Operations Manual.
• Enphase Installer App.
• Download the Enphase Installer App and open it to log in to your Enphase Account. With this mobile
app, you can scan microinverter serial numbers and connect to the IQ
installation progress. To download, go to
• IQ Relay, single-phase (Q-RELAY-1P-INT) or IQ Relay, multi-phase (Q- RELAY-3P-INT).
• Tie wraps or cable clips (ET-CLIP-100).
• IQ Sealing Caps (Q-SEAL-10) for any unused drops on the IQ Cable (optional).
•
IQ Terminator (Q-TERM-R-10 for single-phase or Q-TERM-3P-10 for multi-phase) One for each AC
cable segment end; typically, two are needed per branch circuit.
• IQ Disconnect Tool (Q-DISC-10).
• IQ Cable.
Cable model
Single-phase
Q-25-10-240
Q-25-10-240-A*
Q-25-17-240
Q-25-17-240-A*
Q-25-20-200
Q-25-20-200-A*
Multi-phase
Q-25-10-3P-200
Q-25-17-3P-160
Q-25-20-3P-160
*
Models with "-A" designation for use only in Australia and New Zealand.
• IQ Raw Cable: (Q-25-RAW-300/Q-25-RAW-300-A* for single-phase, Q-25-RAW-3P-300 for multi-
phase) length 300 meters. IQ Raw Cable with no connectors (optional).
14
IQ7+/IQ7X/IQ7A Microinverters Installation and Operation Manual
is required to monitor solar production. For installation information, refer to the
enphase.com/toolkit
Connector spacing PV module orientation
1.3 m Portrait
2.0 m Landscape (60-cell and 96-cell)
2.3 m Landscape (72-cell)
1.3 m Portrait (all)
2.0 m Landscape (60-cell and 96-cell)
2.3 m Landscape (72-cell)
© 2023 Enphase Energy Inc. All rights reserved.
to track system
Gateway
or scan the QR code at right.
Connector count
per box
240
240
200
200
160
160
USM-00003-1.0
August 2023