System Activation Using Enlighten Manager; Figure 34: System Activation Using Enlighten Manager - enphase IQ8D-72-E-US Design Manual

System Activation using Enlighten Manager

A system activation must be created to complete
commissioning. This can be accomplished beforehand
using Enlighten Manager, or on-site using Installer Toolkit.
Follow these steps to create the system activation.
A. Go to http://enlighten.enphaseenergy.com
with your username (email) and password.
Confirm that you are logged into the correct branch
office. If your branch office has not yet been set up in
Enlighten, please contact your Enlighten administrator.
B. In your Enlighten Dashboard, on the Activations widget,
click Add a New System.
C. In the Enlighten Manger interface under site activation,
© 2022 Enphase Energy Inc. All rights reserved.
D. For all commercial sites, select the Voltage and Phase
E. For all commercial sites, select the PV module rating,
and log in

Figure 34: System Activation using Enlighten Manager

select whether the system is residential or commercial.
information.
Type of module, manufacturer, and model.
IQ8D-DG-MKT-00397-02-EN-US-2022-06-10 54