G. ITK displays the 'line-to-line' phase info with each Microinverter that belongs to IQ8D Commercial Gateway.
•
The line connection parameter for a Microinverter
is provided by the Gateway to Enlighten and to ITK via
AP mode. The installer cannot change the line-
to-line info directly in ITK but on refreshing the
Microinverter detailed screen the value SHALL be
updated by Gateway.
03 Set Utility Tariff
•
It is an optional step, recommended to skip.
© 2022 Enphase Energy Inc. All rights reserved.
•
Installer can also see the line-to-line connection
info in the array builder to easily recognize the
Microinverter phase connection.
•
Installer can filter the Microinverters based on the
line-to-line connection in ITK.
Figure 40: ITK Phase Connection
IQ8D-DG-MKT-00397-02-EN-US-2022-06-10
58