Interface Statistics - Proxim ORiNOCO AP-8000 User Manual

Using Web Interface to Manage the Access Point
2. In the SNTP page, do the following:
• Enable SNTP Status: Select Enable SNTP status checkbox to enable SNTP functionality. The following
parameters are configurable only when SNTP is enabled.
• Primary Server IP Address/Domain Name: If SNTP is enabled, enter the host name or IP address of the
primary SNTP server.
• Secondary Server IP Address/Domain Name: If SNTP is enabled, enter the host name or IP address of the
secondary SNTP server.
• Time Zone: If SNTP is enabled, select the appropriate time zone from the drop-down box.
• Day Light Saving Time: When SNTP is enabled, select the Day Light Saving Time from the drop-down box
3. Click Ok.
NOTE: If SNTP Status is disabled, the user cannot configure the SNTP parameters. The following message is displayed
while trying to configure SNTP parameters with SNTP status disabled.

Interface Statistics

The various Interface Statistics features supported by AP are detailed in the following sections.
• Ethernet
• Wireless
Ethernet
To view Ethernet Statistics,
1. Navigate to Monitor > Interface Statistics > Ethernet. This Ethernet Statistics page appears.
Figure 6-58 SNTP Configuration
Figure 6-59 SNTP Status - Disabled
AP-8000 User Guide
97