Installation and Initialization
Logging in to the Web Interface
Once the AP has a valid IP Address and an Ethernet connection, you can use your Web Browser to configure and
monitor the AP.
To configure and monitor the AP device using Web Browser, follow the following steps.
1. Open a Web Browser on a network computer.
2. If necessary, disable the browser's Internet proxy settings. For Internet Explorer users, follow these steps:
–
Select Tools > Internet Options.
–
Click the Connections tab.
–
Click LAN Settings.
–
If necessary, remove the selection from Use a Proxy Server for your Lan box.
–
Click OK twice to save your changes and return to Internet Explorer.
3. Enter the Access Point's IP address in the browser's Address field and press Enter or Go.
This is either the dynamic IP address assigned by a network DHCP server or the static IP address you manually
configured. See
ScanTool
address, if necessary.
The Access Point Login screen appears.
4. Enter the HTTP User Name and Password. The default username and password are "admin" and "public". The user
name and password are case-sensitive.
5. After successful login the Home Page is automatically launched.By default, the Access Point is configured to the
default settings and with those settings you can manage your Access Point. You can change/modify the default
settings according to your network requirements.
for information on how to determine the unit's IP address and manually configure a new IP
Figure 2-7 Login
AP-8000 User Guide
22