Installation and Initialization
System Requirements
To use AP-8000, you must have the following minimum system requirements.
•
Ethernet switch, cross-over or straight Ethernet cable.
•
IEEE 802.11- compliant devices: An 802.11a/b/g or 802.11n client devices
•
A computer that is connected to the same IP network as the AP and has one of the following installed:
–
Web Browser
–
Telnet
–
RS-232 Serial Port
–
MIB Browser
–
Ethernet NIC Card
Product Package
Each AP-8000 shipment includes the items tabulated below. Verify that you have received all parts of the shipment.
NOTE: Unless noted in this table, cables are not supplied with the unit.
AP-8000 Product Package Description
AP-8000 unit with (1 Qty):
– Two radios (802.11a/b/g/n) support
– Ethernet port with PoE support (10/100/1000)
CD-ROM containing software and documentation
(1 Qty)
Quick Installation Guide (1 Qty)
2.4 GHz/ 5GHz omni-directional antennas with reverse
SMA connectors (6 Qty)
Cable Security Cover (1 Qty)
Wall/Ceiling mount plate (1 Qty)
AP-8000 User Guide
Images
15