Qos - Proxim ORiNOCO AP-8000 User Manual

Using Web Interface to Manage the Access Point
• Server Port: Enter the port number which the AP and the server will use to communicate. By default, RADIUS
Authentication/Accounting servers communicate on ports 1812/1813.
• Shared Secret: Enter the password shared by the RADIUS server and the AP. The password can be a maximum
of 65 characters. The default password is "public."
• Entry Status: Select Enable to enable RADIUS server, if required.
• Click OK.
MAC Access Control
To configure MAC Access Control parameters,
1. Click Configuration > Security > MAC ACL. The MAC Access Control page appears.
2. Select the Operation Type and click Ok.
NOTE: Based on the Operation type, you can allow/deny the association of the MAC ACL profile to an SSID.
3. To add new entries for authorized wireless stations that can register with the unit and access the network, click Add.
The MAC ACL Add Row page appears.
4. Enter the MAC Address for the stations, Comment if any and Entry Status, and then click Add.
NOTE: The maximum number of MAC addresses that can be added is 1024.

QoS

The various QoS features supported by AP are described in the following sections:
• EDCA
• 802.1D to IP DSCP Map Table
Figure 6-20 MAC Access Control Page
Figure 6-21 MAC ACL Add Row Page
AP-8000 User Guide
72