View Interface Statistics - Proxim ORiNOCO AP-8000 User Manual

Using CLI to Manage the Access Point
(config-monitor-syslog-host<tbl>)# index 0 row-status createAndGo
Show Command:
System Name# show monitor syslog
// RUNNING-CONFIGURATION //
// SysLog Configuration //
syslog {
status: enable
priority: critical
reset: 0
}
// Host Table Configuration //
index 1 {
ip-address: 10.0.0.1
port: 80
comment:
entry-status: active
}
index 2 {
ip-address: 0.0.0.0
port: 0
comment:
entry-status: active
}

View Interface Statistics

To view Interface Statistics, use the following commands.
System Name# show monitor interface-statistics
// RUNNING-CONFIGURATION //
if-number: 7
// Interface-Statistics //
index 1 {
descripton: eth0
type: ethernet-csmacd
mtu: 1500
speed: 100000000
physical-address: 00:e0:0c:00:7d:09
admin-status: up
operational-status: up
last change: 0-02:11:52.00
in-octets: 958041
in-unicast: 10707
in-non-unicast: 0
in-discards: 0
in-errors: 0
in-unknown-protos: 2049436
out-octets: 2049436
out-unicast-packets: 11095
out-non-unicast-packets: 0
out-discards: 0
out-errors: 0
outqlen: 0
specific: 0.0
AP-8000 User Guide
146