Using Web Interface to Manage the Access Point
System Log Host
To configure System Log Host Event Notifications,
1. Navigate to Monitor > System Log >System Log Host. The System Log Host Table page appears.
2. In the System Log Host Table page, do the following:
•
Click Add button to add new entries. The System Log Host Table Add Row page appears.
•
In the System Log Host Table Add Row page, do the following:
— IP Address: Enter the IP Address for the management host.
— Host Port: Enter the host port number for system logging.
— Comment: Enter any comments.
— Click Add. This will add new entries to the System Log Host Table.
Event Log
To configure Event Logs that occur during the operation of the device,
1. Navigate to Monitor > Event Log. The Event Log page appears.
Figure 6-54 System Log Host Table Page
Figure 6-55 System Log Host Table Add Row Page
AP-8000 User Guide
95