Upgrading The Firmware - Proxim ORiNOCO AP-8000 User Manual

Using Web Interface to Manage the Access Point
NOTES:
• You must reboot the AP, for country selection to take effect.
• Country selection is available only on APs with model numbers ending in -WD. If country selection is available, it
must be set before any interface parameters can be configured.
CAUTION: Romania does not support 20 and 40 MHz band in 11na mode. UK 11na does not support 40 MHz band. The
table below specifies the details:
Country allow 11g
Romania Yes
UK Yes
3. Click OK
System Inventory Management
System Inventory Management provides information about the device hardware, firmware, and software version.
To view System Inventory Management information, navigate to Management < System < Inventory Management. The
System Inventory Management Table appears.

Upgrading the Firmware

The various File Management features supported by AP are described in the following sections:
• Update Device Using HTTP
• Update Device Using TFTP
• Retrieve From Device Using HTTP
• Retrieve from Device Using TFTP
Update Device Using HTTP
To update AP device using HTTP,
1. Navigate to Management > File Management > Update Device > HTTP. The HTTP Update page appears.
allow11a turbo allow11gturbo
No
No
Figure 6-40 System Inventory Management Page
allow11ng20
Yes Yes
Yes Yes
AP-8000 User Guide
allow11ng40 allow11na20
Yes No
Yes Yes
allowna40
No
No
87