To Apply The Changes To The Flash Memory - Proxim ORiNOCO AP-8000 User Manual

Using SNMP Interface to Manage the Access
NOTE: You can configure table by configuring each entry that is available for the table or update the entire table as a
single entry.
3. Select the table, right-click, and click Set.
4. In the Set window, to add a row for a table, enter "0" and this will automatically create a row for a particular table.
5. Add the required parameters and configure those parameters.
6. Click Execute and proceed to SysMgmtCfgCommit table to Commit the changes.

To apply the changes to the flash memory

1. Navigate to deviceMgmt > SysMgmtCfgCommit, right-click and click Set.
2. Set the value as 1 and click OK.
3. Click Execute, this would configure the new value to the flash memory.
AP-8000 User Guide
107