List Commands; Command Line Completion - Proxim ORiNOCO AP-8000 User Manual

Using CLI to Manage the Access Point
NOTES:
• For Dynamic row creation, you have to set the Entry Status/Row Status at the beginning and end of your
command, and then provide other elements.
• To create a new Dynamic row, always set the Index value to 0.
Modify a Table Entry
To modify a table entry, you have to mention the Index Number.
(config-mgmt-access<ctrl>-access<tbl>)# index 1 ipaddress 10.0.0.10
Delete a Table Entry
To delete a table entry, you have to mention the Index Number and Entry Status.
(config-mgmt-access<ctrl>-access<tbl>)#index 5 entry-status destroy

List Commands

Using this feature, you can view a list of commands or arguments when you type the Question Mark (?) at the command
prompt. When you enter a particular character followed by?, then the command prompt will display all the related
commands or arguments that match the character that you have typed.
Example:
System Name>?
Possible completions:
disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from EXEC
show Show
System Name>?
System Name>s?
System Name>show fil?

Command Line Completion

When you enter a command and press TAB, it displays the complete command name that you were typing or it displays
a list of commands if there are multiple matches.
Example:
System Name#con<TAB>
NOTE: Press the TAB key, to complete the command.
System Name#configure
Example
Displays all the commands that are available
Displays all the commands that start with "s"
Displays all the commands that start with "show fil"
Explanation
AP-8000 User Guide
112