Using Web Interface to Manage the Access Point
2. Configure the following parameters.
•
MAC Address: Represents the MAC address of the device.
•
Speed: Represents the speed of the Ethernet interface.
•
Transmit Mode: Represents the Transmit Mode as either Half Duplex or Full Duplex.
•
TxMode And Speed: Select the Speed and Transmission Mode for the Ethernet interface from the drop-down
box.
3. Click Ok.
Security
The various Security features supported by AP are described in the following sections:
•
Wireless Security
•
RADIUS
•
MAC Access Control
Wireless Security
To configure Wireless Security parameters,
1. Navigate to Configuration > Security > Wireless Security. The Wireless Security Configuration page appears.
2. To edit an existing entry, click the Edit icon. The Wireless Security Edit Row page appears.
Figure 6-12 Ethernet Page
Figure 6-13 Wireless Security Configuration Page
AP-8000 User Guide
68