Using Web Interface to Manage the Access Point
2. In the Event Log page, do the following:
•
Log Priority: Select Log Priority from the drop-down box.
•
Click Show Event Log to display the Event Logs for a selected Log Priority.
3. Click Ok, to hide the display of Event Logs.
NOTE: Select Clear Event Log, if you want to clear the event log table.
SNTP
To configure SNTP features,
1. Navigate to Monitor > SNTP. The SNTP page appears.
Figure 6-56 Event Log Page
Figure 6-57 Event Log Details
AP-8000 User Guide
96