System Log - Proxim ORiNOCO AP-8000 User Manual

Using Web Interface to Manage the Access Point

System Log

To configure System Log settings,
1. Navigate to Monitor > System Log. The System Log page appears.
2. In the System Log page, do the following:
• Log Status: Select the Log Status from the drop-down box. Select Enable to enable the System Log status and
Disable to disable the System Log status.
• Log Priority: Select the Log Priority from the drop-down box. The AP will send event messages to the System
Log server that correspond to the selected priority.
3. Click Show System Log to display the System Logs for a selected Log Priority.
4. Click Ok, to hide the display of System Logs.
NOTE: Click Clear System Log if you want to clear the logs.
Figure 6-52 System Log Page
Figure 6-53 System Log Information
AP-8000 User Guide
94