Using Web Interface to Manage the Access Point
Wireless
The various Wireless Interface features supported by AP are described in the following sections:
•
VAP
•
Properties
•
11n Properties
Interface 1
You can view and configure the following parameters for Interface 1.
NOTE: By default both the Interfaces (Interface1 and Interface2) are active. If you want, you can change the default
values for one Interface
VAP
To configure VAP,
1. Navigate to Configuration > Wireless > Interface 1> VAP. The Wireless Interface - 1 page appears.
NOTE: You can configure up to 4 VAP.
2. Click the radio button against the VAP Index for which you want to make changes and click Edit.
3. The Wireless Interface 1 / VAP-1 page appears. Using this page, you can modify the Wireless VAP parameters.
Figure 6-7 VAP Page
AP-8000 User Guide
62