Table of Contents
Advertisement
Installing the clutch discs
18.5.16
-
Slide the clutch basket onto the gearbox main shaft. Turn the
@)
oil pump gear
until the gear teeth of the clutch basket
mesh.
C,
-
Slide on washer
and inner clutch hub
-
Position the new lock washer and mount nut 0). Tighten the
nut, holding the inner clutch hub with a special tool.
Guideline
Nut, inner
M18x1.5
clutch hub
I
Holding wrench (51129003000)
-
Secure the nut with the lock washer.
-
Thoroughly oil the clutch facing discs.
-
Beginning with an intermediate clutch disc, alternately insert
all other clutch facing discs and intermediate clutch discs into
the clutch basket.
Mount clutch throw-out
8.
-
Position pressure cap
0.
100 Nm (73.8 lbf ft)
Loctite
(a
p. 358)
O.
18 ENGINE
®
243
™
..
235
Advertisement
Table of Contents
