Table of Contents
Advertisement
18 ENGINE
180
-
Connect negative cable
Guideline
Screw, battery termi-
nal
•
Info
e
I
Contact disk
must be mounted between screw �
and cable lug � with the claws facing downward.
-
Refill the coolant.
(a
p. 258)
-
Install the main silencer.
-
Install the right side cover.
-
Remove the motorcycle from the lift stand.
(FE 350 SUS)
-
Install the activated charcoal filter.
-
Install the fuel tank.
(a
-
Mount the seat.
(a
p. 97)
(FE EU/AU, FE 350 US)
-
Install the fuel tank.
(a
-
Mount the seat.
(a
p. 97)
-
Remove oil filler plug � on the clutch cover and fill up with
engine oil.
Engine oil
-
Mount and tighten filler plug �-
Danger
Danger of poisoning
inhaling them may result in unconsciousness and
death.
-
Always make sure there is sufficient ventilation
when running the engine.
-
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
-
Start the engine and check that it is oil-tight.
-
Switch off the engine.
-
Check the engine oil level.
-
Check the coolant level.
-
Execute the initialization run.
Finishing work
-
Take a test ride.
-
Read out the fault memory using the Husqvarna Motorcycles
diagnostics tool.
-
Check the engine for leak tightness.
-
Check the engine oil level.
-
Check the coolant level.
e
of the battery.
M5
2.5 Nm (1.84 lbf ft)
(a
p. 87)
(a
p. 96)
(0
p. 13)
(a
p. 109)
p. 100)
p. 100)
1.0 I (1.1 qt.)
Engine oil
(SAE 1 0W/50)
(a
p. 352)
Exhaust gases are toxic and
(ll,ll
p. 259)
(ll,ll
p. 256)
(l!!J
p. 274)
(l!!J
p. 259)
(l!!J
p. 256)
Advertisement
Table of Contents
