Disassembling The Fork Legs - Husqvarna FE 350 2016 Repair Manual

Table of Contents

Advertisement

6 FORK, TRIPLE CLAMP
20

Disassembling the fork legs

Info
The operations are the same on both fork legs.
201700-10
Condition
The fork legs have been removed.
-
Note down the current state of rebound damping
(red adjuster on the right fork leg).
-
Note down the current state of compression
8
damping
(white adjuster on the left fork leg).
COMP
-
Open the adjusters on the rebound and compression damp­
ing all the way.
-
Clamp the fork leg in the area of the lower triple clamp.
I Clamping stand (T1403S)
fD.
-
Remove screw
Remove adjuster.
-
Loosen the screw cover
I Mounting tool (T1404 7)
Info
The cartridge cannot be taken off yet.
-
Unclamp the fork leg.
-
Slide the outer tube down. Drain the fork oil.
O
(0
p. 370)
C,.
(0
p. 370)
REB

Advertisement

Table of Contents
loading

Table of Contents