Table of Contents
Advertisement
6 FORK, TRIPLE CLAMP
6.27
42
D00075-10
Ad"ustin
the steerin
-
Remove upper bearing ring
Tool bracket (58429089000)
Pressing tool (58429092000)
-
Press the new bearing ring up to the stop with special
tool@).
Tool bracket (58429089000)
Pressing tool (58429091000)
-
Remove lower steering head bearing
-
Remove the seal ring.
-
Grease and mount the new seal ring.
-
Press on the new bearing with a suitable tube as far as it will
go.
Finishing work
-
Install the lower triple clamp.
-
Install front fender.
-
Install the front wheel.
-
Install the headlight mask with the headlight.
-
Check that the wiring harness, throttle cables, and brake and
clutch lines can move freely and are routed correctly.
-
Check the play of the steering head bearing.
-
Remove the motorcycle from the lift stand.
-
Check the headlight setting.
head bearin
Preparatory work
-
Raise the motorcycle with a lift stand.
C,
with special tool@.
(I!!;!
p. 359)
(�
p. 359)
(�
p. 359)
(a
p. 359)
0-
(I!!;!
p. 38)
(a
p. 112)
(a
p. 122)
(a
(�
(�
p. 13)
(�
p. 169)
(�
p. 13)
p. 114)
p. 40)
..
Advertisement
Table of Contents
