Checking The Lubrication System; Removing The Crankshaft Bearing Inner Race - Husqvarna FE 350 2016 Repair Manual

18 ENGINE
18.4.5
-
Check the internal rotor and external rotor of oil pumps
-
Check oil pump shaft @} for damage and wear.
-
Check the oil pump cover for damage and wear.
18.4.6
202

Checking the lubrication system

•
✓
If there is damage or wear:
-
Change the oil pumps.
If there is damage or wear:
-
Change the oil pump shaft.
If there is damage or wear:
-
Change the oil pump cover.

Removing the crankshaft bearing inner race

0)
✓
O
for damage and wear.
-
Fix the crankshaft in the vise.
Info
Use soft jaws.
O.
-
Warm up special tool
Guideline
1150 °C (302 °F)
I Puller (58429037037) (�
-
Push the warmed up special tool
bearing inner race, press firmly together and pull jointly from
the crankshaft.
-
Take off the compensating disk.
-
Repeat the operation on the opposite side.
305003-10
p. 359)
O
onto the crankshaft
..