Table of Contents
Advertisement
18.4.31
Checking the electric starter drive
-
Check the gear mesh and bearing of starter idler gear
If there is damage or wear:
Change the starter idler gear.
-
Check the gear mesh and bearing of torque limiter @} for damage and wear.
If there is damage or wear:
Change the torque limiter.
-
Check the gear mesh and bearing of freewheel gear
If there is damage or wear:
Change the freewheel gear or bearing.
C,
-
Check freewheel
for damage and wear.
If there is damage or wear:
Change the free wheel.
-
Check the gear mesh of starter motor
If there is damage or wear:
Change the starter motor.
(D
-
Change O-ring
of the starter motor.
-
Connect the negative cable of a 12 volt power supply to the housing of the starter motor. Connect the posi-
tive cable of the power supply briefly with the connector of the starter motor.
If the starter motor does not turn when the circuit is closed:
Change the starter motor.
·-•
e
0
I
fD
0
for damage and wear.
0
305006-10
O
for damage and wear.
for damage and wear.
18 ENGINE
217
Advertisement
Table of Contents
