Husqvarna FE 350 2016 Repair Manual page 29

Check the inner tube and axle clamp for damage.
If there is damage:
-
Change the inner tube.
B03581-10
Measure the outside diameter at multiple locations of the
inner tube.
Outside diameter of inner
tube
If the measured value is smaller than the specified value:
-
Change the inner tube.
Measure the run-out of the inner tube.
I
Inner tube run-out
If the measured value is larger than the specified value:
-
Change the inner tube.
Measure the inside diameter at multiple locations of the outer
tube.
Inside diameter of outer
tube
If the measured value is larger than the specified value:
-
Change the outer tube.
Check the outer tube for damage.
If there is damage:
B03584-10
-
Change the outer tube.
Check the surface of the sliding bushings.
If the bronze-colored layer
visible or the surface is rough:
-
Change the sliding bushings.
6 FORK, TRIPLE CLAMP
47.975 ... 48.005 mm
(1 .88878 ... 1 .88996 in)
I
s 0.20 mm (s 0.0079 in)
s 49.20 mm (S 1 .937 in)
4D
6)
under sliding layer is
27