Table of Contents
Advertisement
Removin the main silencer
Warning
Danger of burns
The exhaust system gets very hot when the vehicle is driven.
-
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Raise the wheel slightly to be able to mount the screw
more easily.
(EU)
-
Connect plug-in connector
route the cable without tension, and secure with a new
cable tie.
-
Install the fuel tank.
(l!!ll
Finishing work
-
Install the main silencer.
-
Install the right side cover.
-
Mount the seat.
(!!,!I
p. 97)
-
Remove the motorcycle from the lift stand.
Preparatory work
-
Remove the right side cover.
Main work
O.
-
Disconnect spring
I
Spring hook (50305017000)
8
-
Remove screws
and take off the main silencer.
Main work
-
Mount the main silencer. Mount screws
tighten yet.
8.
-
Attach spring
I
Spring hook (50305017000)
O.
-
Tighten screws
Guideline
Remaining screws,
chassis
@)
of the lambda sensor,
p. 100)
(l!!ll
p. 87)
(l!!ll
p. 96)
(!!,!I
p. 13)
(l!!ll
p. 96)
(a
p. 357)
O
but do not
(a
p. 357)
M6
10 Nm (7.4 lbf ft)
10
EXHAUST
87
Advertisement
Table of Contents
