Table of Contents
Advertisement
9.31
Changing the swingarm bearing
9 SHOCK ABSORBER, SWINGARM
-
Position the engine sprocket cover and mount in the holder.
Mount and tighten screws
Guideline
Screw, clutch slave
cylinder
-
Mount and tighten screws (3.
Guideline
Remaining screws,
chassis
-
Position the brake caliper and pull it back.
-
Position the brake line in the guide.
Finishing work
-
Install the rear wheel.
(Ii!:!
-
Remove the motorcycle from the lift stand.
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the rear wheel.
-
Remove the swingarm.
(Ii!:!
C,.
M6
10 Nm (7.4 lbf ft)
M8
25 Nm (18.4 lbf ft)
p. 126)
(Ii!:!
p. 13)
(Ii!:!
p. 13)
(Ii!:!
p. 125)
p. 77)
79
Advertisement
Table of Contents
