Changing The Main Fuse - Husqvarna FE 350 2016 Repair Manual

15 WIRING HARNESS, BATTERY
Warning
Fire hazard
-
-
The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing
under the air filter box lid.
142

Changing the main fuse

Incorrect fuses overload the electrical system.
Only use fuses with the required ampere value.
Do not bypass or repair fuses.
Info
Preparatory work
(FE EU/AU)
-
Press and hold the kill switch � while the engine is idling
until the engine stops.
(FE 350 US)
-
Press and hold the kill switch � while the engine is idling
until the engine stops.
(FE 350 SUS)
-
While the engine is idling, turn the key in the ignition lock
to the position �-
-
Remove the air filter box cover.
Main work
-
Take off protection caps
-
Remove faulty main fuse fj.
Info
You can recognize a faulty fuse by a burned-out fuse
wiref).
(D
A spare fuse is located in the starter relay.
-
Install a new main fuse.
I Fuse (58011109120) (�
-
Check that the electrical system is functioning properly.
• Tip
I
Insert a spare fuse so that it is available if needed.
-
Mount the protection caps.
Finishing work
-
Install the air filter box cover.
(!!l p. 92)
O.
p. 281)
(� p. 92)