15 Wiring Harness, Battery; Changing The Fuses Of Individual Power Consumers - Husqvarna FE 350 2016 Repair Manual

15 WIRING HARNESS, BATTERY

The fuse box containing the fuses of individual power consumers is located under the seat.
140
Changing the fuses of individual �ower consumers
Info
Preparatory work
(FE EU/AU)
-
Press and hold the kill switch (5<:) while the engine is idling
until the engine stops.
(FE 350 US)
-
Press and hold the kill switch (5<:) while the engine is idling
until the engine stops.
(FE 350 SUS)
-
While the engine is idling, turn the key in the ignition lock
to the position (5<:)_
-
Remove the seat. (� p. 97)
Main work
(FE EU/AU, FE 350 US)
-
Open fuse box cover
-
Remove the defective fuse.
Guideline
Fuse 1 - 10 A - EFI control unit
Fuse 2 - 10 A- fuel pump
Fuse 3 - 10 A - high beam, low beam, parking light, tail
light, license plate lamp
Fuse 4 - 10 A - horn, brake light, turn signal, radiator
fan
- 10 A - spare fuses
Fuses res
• Info
I
e.
You can recognize a faulty fuse by a burned-out
fuse wire
Warning
Fire hazard
cal system.
-
Only use fuses with the required ampere
value.
-
Do not bypass or repair fuses.
-
Use spare fuses with the correct rating only.
I
Fuse (75011088010)
O.
Incorrect fuses overload the electri­
(� p. 281)