Installing The Clutch Discs - Husqvarna FE 350 2015 Repair Manual

ENGINE
18
18.5.16

Installing the clutch discs

8
-
Slide on washer and inner clutch hub
-
Position the new lock washer and mount nut (s). Tighten the nut, holding the
inner clutch hub with a special tool.
Guideline
Nut, inner clutch hub
I
Clutch holder (51129003000)
-
Secure the nut with the lock washer.
-
Thoroughly oil the clutch facing discs.
-
Beginning with an intermediate clutch disc, alternately insert all other clutch fac-
ing discs and intermediate clutch discs into the clutch basket.
O.
-
Mount pressure piece
-
Position pressure cap (i}.
@)
-
Mount pretension ring
8-
-
Position spring washer
0.
M18x1 .5 100 Nm
(73.8 lbf ft)
(� p. 290)
with the marking facing up.
Top
183
Loctite 243
® ™