Table of Contents
Advertisement
(FE US)
O
-
Remove screws
of connecting cap
-
Remove connecting cap with the perforated pipe, 0-
ring (D, and glass fiber yarn filling
C,
-
Remove screws
and silencer cap
@)
-
Remove screws
and insert
ing pad Gi).
-
Remove the insulating pad from the insert.
-
Clean the parts that need to be reinstalled and check for
damage.
-
Mount the new insulating pad on the insert and fasten
with adhesive tape.
-
Position the insert with the insulating pad in outer
G,.
tube
-
Mount and tighten screws
Guideline
Screws on the
main silencer
-
Mount 0-ring (D on the silencer cap.
-
Fit the new glass fiber yarn filling onto the perforated
pipe.
-
Fit the connecting cap with the glass fiber yarn filling in
the outer tube.
Info
Press the glass fiber yarn filling into the outer tube
using a blunt tool.
-
Mount and tighten screws
Guideline
Screws on the
main silencer
-
Mount 0-ring @ on the silencer cap.
-
Position the silencer cap with 0-ring @ in the outer tube.
-
Mount and tighten screws
Guideline
Screws on the
main silencer
Finishing work
-
Install the main silencer.
-
Install the right side cover.
8.
8.
(D
with 0-ring
@)
together with insulat-
@).
M5
7 Nm (5.2 lbf ft)
O.
M5
7 Nm (5.2 lbf ft)
0.
M5
7 Nm (5.2 lbf ft)
(a
p. 87)
(a
p. 96)
10
EXHAUST
@.
89
Advertisement
Table of Contents
